Pricing / DDoS Protection

DDoS Protection Pricing

24/7 automatic attack detection and mitigation for your critical infrastructure. Regardless of attack size.

🛡️

Attack Detection

We continuously monitor your traffic and detect anomalies and DDoS attacks within seconds.

🚦

Traffic Filtering

We filter malicious traffic at the edge of our network and forward only legitimate user traffic to your systems.

📈

Reporting & Monitoring

We provide detailed traffic reports and full visibility during and after every attack.

⏱️

Rapid Deployment

An architecture that can be deployed quickly with minimal changes to your existing infrastructure.

🌍

Global Protection

Multi-point defence against volumetric attacks originating from different locations worldwide.

🤝

Expert Support

Expert team support and consulting before, during and after every attack.

Customer Portal

Full visibility of your traffic

Monitor your traffic in real time, review attack history down to packet level, manage per-IP protection modes and track invoices with transparent pricing — all in your dedicated customer portal included with our DDoS protection service.

Screen 1 of 7

Dashboard — During an active attack

The first screen customers see when they log in. An alert banner appears during an active attack; three summary panels display parallel status information.

Dashboard — During an active attack
1 active attack — Your IP addresses are under attack. Details →
3C1B DDoSActive Attacks
███.███.██.██
00:03:10
Abnormally high rate of UDP incoming packets
13.04.2026 13:28
3C1B DDoSProtection Status
███.███.██.0/24Mitigation
██.███.██.0/24Normal
3C1B DDoSRecent Attacks
███.███.██.██
00:11:55
Abnormally high rate of UDP
███.███.██.██
00:39:07
Abnormal UDP large size packets
1
Active attack alert banner — As soon as an attack begins, a red warning banner appears at the top of the page showing how many IPs are affected, the start time and a link to the full details.
2
Protection status panel — Each BGP prefix is shown with its current state: Transit (normal traffic) or Mitigation (scrubbing active). Prefixes in Mitigation mode are highlighted with a red badge.
3
Recent attacks list — The last five events are listed with the target IP, attack type, date and duration. A quick summary is visible at a glance without navigating away.
Screen 2 of 7

Attack History — Packet-level detail

All attack events from the past 90 days are listed. Each event can be expanded to reveal source IP, port, protocol and packet size data.

Attack History
3C1B DDoSVoxility — Protected Subnets
PREFIXBGP STATUSL7 FILTER
███.███.██.0/24 Mitigation ✓ Active
██.███.██.0/24 Transit ✓ Active
3C1B DDoSActive Attacks
███.███.██.██
Abnormally high rate of UDP incoming packets 13.04.2026 13:28 00:03:41
Attack History (Last 90 Days)
IP ADDRESSTYPEDATEDUR.
███.███.██.██ Abnormally high rate of UDP 13.04.2026 13:10 00:11:55 ∧
300 packets — 1 unique flow
COUNTSRC IPSRC PORTDST IPDST PORTPROTOFLAGSSIZE
300██.███.███.██443███.███.██.██56080UDP—1278 B
███.███.██.██Abnormally high rate of UDP13.04.2026 12:4000:10:54∨
███.███.██.███Abnormal UDP large size packets13.04.2026 12:0100:59:16∨
1
Prefix and BGP status table — Each subnet shows its current BGP mode (Transit / Mitigation) and L7 filter state. When Mitigation is active, traffic entering that block is being processed through the scrubbing centre.
2
Live attack counter — Ongoing attacks are listed with the target IP, type and elapsed time. The panel remains highlighted in red until the attack ends.
3
Packet-level evidence — Expanding any historical event reveals source IP, port, protocol and packet size. Security teams can use this data to write firewall rules or produce incident reports.
Screen 3 of 7

Protection Settings — Per-IP mode management

Customers can independently manage the Voxility protection mode and L7 filter for each individual IP. Changes are synchronised via API in real time.

DDoS Protection Settings
BGP-announced prefixes and their current Voxility protection settings are listed below.
██.███.██.0/24 — Transit ███.███.██.0/24 — Transit ███.███.██.0/24 — Mitigation ███.███.██.0/24 — Transit
Custom IP Settings — 5 IPs
IP ADDRESSMODESTATUSL7SYNCACTIONS
███.███.██.███/32SensorPassive✓ Active13.04 13:32
↻
✎
✕
███.███.██.██/32Sensor⚡ ActiveBypass13.04 13:32
↻
✎
✕
███.███.██.██/32SensorPassive✓ Active13.04 13:32
↻
✎
✕
███.███.██.███/32SensorPassive✓ Active13.04 13:32
↻
✎
✕
1
Transit / Mitigation prefix view — All BGP blocks are listed as chips. A block under attack turns red, making it immediately clear which subnet is being routed through scrubbing.
2
Per-IP mode change — Protection mode (Sensor / Always-on) and L7 filter can be set independently for each /32 IP. Changes take effect immediately via the Voxility API; the last sync time is shown in the table.
3
Refresh / Edit / Reset — The three icons on the right: pull the current state from Voxility again, change the mode or L7 setting, or reset the IP to its default settings. Every action is protected by a confirmation dialog.
Screen 4 of 7

Traffic Usage — Real-time monitoring

Peak Mbps and monthly TB values are tracked on a real-time graph. Monthly, daily and hourly breakdowns are available.

Usage — April 2026 / Daily
Peak Mbps
247.3
Monthly TB
3.821
Avg. Mbps
112.4
Active Tier
P3 (5 TB)
Peak Mbps
1
Peak Mbps and monthly TB tracking — The highest speed reading for each day is plotted on the graph. Since billing is calculated on monthly traffic (TB), these metrics are critical.
2
Monthly / Daily / Hourly breakdown — Switch between monthly, daily and hourly views from the tabs above the graph. Useful for detailed analysis and capacity planning.
Screen 5 of 7

Traffic Detail — Prefix and IP breakdown

See which IP block is consuming how much traffic, and drill down to which individual IPs within a block are leading — all in an expandable accordion view.

Traffic Detail — Prefix & IP
MonthDayHour
▼ ███.█.█.0/24 247.3 Mbps 4.820 GB
███.█.█.██98.4 Mbps
███.█.█.█72.1 Mbps
███.█.█.██41.7 Mbps
▶██.█.█.0/24124.6 Mbps2.140 GB
▶███.███.██.0/2438.2 Mbps0.620 GB
1
Per-prefix traffic view — Each BGP block is listed with total Mbps and GB consumption. Which subnet is drawing the most traffic is clear at a glance.
2
Drill down to IP level — Clicking a prefix reveals the traffic breakdown of individual IPs within that block, making it clear which server is consuming bandwidth.
Screen 6 of 7

Estimated Invoice — TB Package

Billing is based solely on the clean traffic delivered to you after passing through Voxility's scrubbing infrastructure. Customers can see their estimated total at any point during the month without waiting for month-end.

Invoice — April 2026
Estimated P3 active — 3.821 / 5.000 TB
P3 — 5 TB quota 3.821 TB used (76%)
1.179 TB remaining Next: P4 (10 TB) → € 160
Monthly TB used3.821 TB
Active tierP3 — up to 5 TB → € 110 / mo
Tier upgradeNot triggered
Estimated monthly total € 110.00
1
Real-time estimated total — Calculated from the TB consumed so far in the month. If the tier is exceeded the total updates automatically — no surprise invoices.
2
Remaining quota and tier warning — A progress bar shows how much of the active package has been used. When the package is nearly full, the system shows how far away the next tier is.
Screen 7 of 7

Price Table — Clean Traffic (TB) Tiers

Pricing is calculated exclusively on the clean traffic returned to you by Voxility — attack traffic is never counted. The TB auto-tier model and the Peak+TB combined model are listed side by side.

Pricing — TB Package & Peak+TB
TB Package (auto-tier) — P1 to P9
TierIncluded TB/moMonthly feeEUR/TB
P11 TB€ 4040.00
P22 TB€ 6432.00
P3 ★5 TB€ 11022.00
P410 TB€ 16016.00
P525 TB€ 30012.00
P650 TB€ 4759.50
P7100 TB€ 7507.50
P8200 TB€ 1,3006.50
P9300 TB€ 1,8006.00
Peak + TB Package
TierPeakTB/moFee
Peak-S250 Mbps2 TB€ 200
Peak-M500 Mbps8 TB€ 400
Peak-L1 Gbps25 TB€ 750
Peak-X2 Gbps60 TB€ 1,400
1
Automatic tier system — At month-end, the clean traffic volume returned by Voxility is compared against each tier's included TB. The smallest tier that covers actual usage is applied. Attack traffic is excluded from this calculation.
2
Peak + TB model — The smallest tier that satisfies both the peak Mbps and monthly TB constraints simultaneously is selected. Suitable for businesses with high-speed traffic bursts.
The customer portal is provided free of charge with our DDoS protection service.
2,5 TB
504 Mbps
Calculating…
TB Package tiers (Model B)
Package Included TB/mo Monthly fee EUR/TB
Peak Reservation tiers (Model C)
Package Peak Included TB Monthly fee

The simulator shows estimated values. Please contact us for a precise quote based on your actual usage.

Request a Quote

Pay-as-You-Go

No fixed monthly fee. You are billed only in months when an attack occurs, based on the peak clean traffic volume returned from the scrubbing infrastructure. Attacks below a defined traffic threshold incur no additional charge.

✓Ideal for businesses that experience infrequent attacks.

Committed + Usage

A fixed monthly minimum service fee guarantees a defined traffic quota; clean traffic consumption beyond that quota is billed separately. Suitable for those seeking a predictable cost structure.

✓Recommended for organisations with regular attack volumes who require budget predictability.

Flat Rate

A single fixed monthly fee applies regardless of attack frequency. Traffic volume or attack count does not affect your bill, providing maximum cost certainty.

✓Suited for organisations under heavy attack or those wishing to eliminate cost variability entirely.

Pricing is tailored to your usage profile and traffic volume. Please contact us for a detailed proposal.

Request a Quote

Under an active attack?

Call our 24/7 technical team for emergency response — +90 (312) 988 00 00

Call Now →